Light-cured
glaze repair
Compound
MAKE THE FLAW FADE AWAY.
CeraFixe LCA is a ready-to-use nano acrylic compound for filling pinholes and hairline cracks on sanitaryware glaze and porcelain—precision-applied, colour-matched and cured solid with an LED-D torch.
Small defects deserve a
precise solution.
Designed specifically for glazed ceramic surfaces, CeraFixe helps restore the appearance of sanitaryware and porcelain without measuring catalysts or racing against pot life.
- ✓ Ready to use straight from the 2 g cartridge
- ✓ Viscous paste stays where it is applied
- ✓ Hard, wear-resistant finish after light curing
- ✓ Ideal for minor pinholes and hairline glaze cracks
From visible crack to a
cleaner finish.
The compound is seated into the defect, levelled with the surrounding glaze and cured with the dedicated light. Results depend on careful preparation, shade matching and application technique.
Before & after
A visual comparison of a cracked glazed ceramic panel and the repaired finish.
Placed with precision
The repair compound is worked directly into the hairline defect before curing.
Prepare. Fill. Shape. Cure.
Follow the product instructions and use the correct LED-D wavelength for reliable curing.
01
Clean & dry
Remove dust, grease and residue. Good surface preparation is essential for adhesion.
02
Apply precisely
Place a small quantity into the pinhole or hairline crack and keep it within the repair area.
03
Level the surface
Shape the uncured material so the repaired area follows the surrounding glaze.
04
Light cure
Cure with an LED-D torch at 370–400 nm for up to 30–45 seconds.
Built around the repair bench
Compact, controlled and ready when a glazed surface needs attention.
Practical
performance in
every small detail.
Fast light cure
The compound cures solid under the specified LED-D light, without a separate hardener.
Targeted application
The syringe format helps place material exactly where a minor repair is needed.
Durable hardness
A cured Shore D hardness above 60 supports a rigid, wear-resistant repair.
Colour options
Choose from four standard shades or discuss a custom match for your glazed surface.
Four familiar
shades.
One cleaner
result.
White, ivory, blue and pink are available as standard. For production requirements, a custom shade can be developed to suit the tone of the glaze.
The technical confidence
behind the colourful
design.
Good to know
before you repair.
For best results, follow the supplied technical and handling instructions for the exact product batch.
Need Our Services?
Call: +91 97695 93030
Work Hours
Mon – Sat: 9:00 AM – 6:00 PM IST
Email Us
support@geoconproducts.com